Recycling Systems
Formulations
Additives
Consulting
Literature & FAQ

FRP Recycling Systems

Recycling and Dry Additive System with No Roll™

The recycling and dry additive system with No Roll™ is a two part system incorporating a formulation designed to compliment one another or can be utilized separately.

Recycling Systems

Recycling and Dry Additive System with No Roll™

The recycling and dry additive system with No Roll™ is a two part system incorporating a formulation designed to compliment one another or can be utilized separately.

FRP Grinder
This machine is not a mulcher, but similar to hammer-mill. It is built to withstand abrasive fiberglass trimmings and maintains a low temperature; eliminating fear of combustion. The FRP grinder will allow you to maintain the integrity of the fibers for viable reuse. Our grinders are available in four basic models with various screen sizes.

Click Here to view the FRP Grinder in action!
Click Here for Grinder commonly asked questions.
Click Here for Grinder models and details .


Dry Additive Dispensing
This system consist of a metering device and a hopper designed to attach to an air powered fiberglass spray gun/chopper. This process enables you to use recycled FRP fibers with preexisting spray-up machinery allowing you to spray a stream.

Click Here to view a spray-up demo with our dispensing system.
Click Here to download full version of demo. (14 MB)

No Roll™
Seven years in the making this spray-up formulation virtually eliminates all rollout labor even when using 1” long chop. No Roll™ uses an internal, high-solid spray laminate mix of up to 25% glass fiber that requires no rollout. Due to its unique design it allows for:

  • VOC levels as low as 10 ppm
  • Faster mold turnover, 3 to 6 minute gel time
  • Improved physical product strength
  • Reduced water absorption
  • Can be applied between 0.040” to 0.500”

Click Here to view a spray-up demonstration with No Roll™.
Click Here to download full version of demo. Coming Soon!

Seawolf Research & Development, Inc. dba Seacast Enviromental Solutions, Inc.
333 West Marion Avenue, Suite #15
Post Office Box 850
Edgewater, FL 32132
Toll Free (877) 716-4820 Ph: (386) 428-4722 Fax: (386) 428-8236
www.thermoformequip.com |www.SeawolfIndustries.com| www.gogreenfrp.com